Section 1. Getting Started
PX-708A Installation and Users Manual
5
•
Overburn: Lets you burn more information on a standard disc—
audio up to 99 minutes 59 seconds in length, or a data disc up to 875
MB in capacity.
Minimum Configuration to Use the PX-708A
Here’s what you’ll need in order to install and use the PX-708A drive.
•
Computer: Pentium III 700-MHz CPU or faster.
•
Minimum RAM: 128 MB.
•
Interface: IDE ATAPI interface.
•
Hard disk size: To write to a CD in image mode (that is, to write an
image of a CD to your hard disk), you need 1 GB of free space. For a
DVD, 6 GB of free space is recommended. (For more accurate
guidelines, see the help files or documentation for the recording
software you’re using.)
•
Operating System: Windows XP, 2000, Me, 98SE.
NOTE
: You cannot use the PX-708A with early versions of Windows 98;
if you are using Windows 98, it must be Windows 98SE (Second Edition).
What You Can Do with the PX-708A
Just look at some of the things you can do with your PX-708A:
•
Record slide shows or digital video onto DVD+R, -R, +RW and
-RW discs.
•
Play DVD+R, DVD+RW, DVD-R, and DVD-RW discs.
•
Record data or audio onto writable or rewritable CD media.
•
Play music CDs.
•
Save photos and other images on rewritable or writable CDs.
•
Create a CD or DVD “sneakernet” to share information with
colleagues—just use software such as Roxio’s DirectCD to drag and
drop files onto DVD+R, DVD+RW, CD-R or CD-RW media, then
continue adding files and sharing the same disc.
•
Archive images and video to DVD or CD.
•
Master new software programs on DVD or CD.
To Next Page
Loading...
