Plot MAM-880 - Page 11

A
Controller displays the current value = sample
value × COEF
CUR ***.*A
Displays the current controller sampling current
values. This value is the real value can not be
set.
M
O
T
O
R
B
TARGET CUR 0000
Enter the current value, the controller will detect
user input value divided by the current to the
current value, calculate the current coefficient
COEF 1.000
Calibration current, the input coefficients.
Controller displays the current value = sample
value × COEF
CUR ***.*A
Displays the current controller sampling current
values. This value is the real value can not be
set.
M
O
T
O
R
C
TARGET CUR 0000
Enter the current value, the controller will detect
user input value divided by the current to the
current value, calculate the current coefficient
COEF 1.000
Calibration current, the input coefficients.
Controller displays the current value = sample
value × COEF
CUR ***.*A
Displays the current controller sampling current
values. This value is the real value can not be
set.
F
A
N
A
TARGET CUR 0000
Enter the current value, the controller will detect
user input value divided by the current to the
current value, calculate the current coefficient
COEF 1.000
Calibration current, the input coefficients.
Controller displays the current value = sample
value × COEF
CUR ***.*A
Displays the current controller sampling current
values. This value is the real value can not be
set.
F
A
N
B
TARGET CUR 0000
Enter the current value, the controller will detect
user input value divided by the current to the
current value, calculate the current coefficient
COEF 1.000
Calibration current, the input coefficients.
Controller displays the current value = sample
value × COEF
CUR ***.*A
Displays the current controller sampling current
values. This value is the real value can not be
set.
F
A
N
TARGET CUR 0000
Enter the current value, the controller will detect
user input value divided by the current to the
current value, calculate the current coefficient