PMA KS800 - Page 33

GControlPar
(Funktions-Nr: 12)
Code Descr. Channel R/W Type Description Range Rem.
B2 A/M 1 R/W INT Automatic / manual switch-over of channel 1
Coff 1 R/W INT Controller on/off of channel 1
w/W2 1 R/W INT Switch-over w/W2 of channel 1
Ostart 1 R/W INT Self-tuning start of channel 1
SoftStartEnable 1 R/W INT
BoostStartEnable 1 R/W INT
A/M 2 R/W INT Automatic / manual switch-over of channel 2
Coff 2 R/W INT Controller on/off of channel 2
w/W2 2 R/W INT Switch-over w/W2 of channel 2
Ostart 2 R/W INT Self-tuning start of channel 2
SoftStartEnable 2 R/W INT
BoostStartEnable 2 R/W INT
...
A/M 8 R/W INT Automatic / manual switch-over of channel 8
Coff 8 R/W INT Controller on/off of channel 8
w/W2 8 R/W INT Switch-over w/W2 of channel 8
Ostart 8 R/W INT Self-tuning start of channel 8
SoftStartEnable 8 R/W INT
BoostStartEnable 8 R/W INT
GAlarmPar
(Funktions-Nr: 13)
Code Descr. Channel R/W Type Description Range Rem.
B2 LimL 1 R/W INT Low Alarm of channel 1
LimH 1 R/W INT High Alarm of channel 1
LimLL 1 R/W INT Low Low Alarm of channel 1
LimHH 1 R/W INT High High Alarm of channel 1
LimL 2 R/W INT Low Alarm of channel 2
LimH 2 R/W INT High Alarm of channel 2
LimLL 2 R/W INT Low Low Alarm of channel 2
LimHH 2 R/W INT High High Alarm of channel 2
...
LimL 8 R/W INT Low Alarm of channel 8
LimH 8 R/W INT High Alarm of channel 8
LimLL 8 R/W INT Low Low Alarm of channel 8
LimHH 8 R/W INT High High Alarm of channel 8
Function block protocol
31 9499 040 50511