PMDG 737NGX - Page 134

0.00.134 PMDG 737NGX
TUTORIAL #2
27FEB15 RTM DO NOT DUPLICATE For Simulator Use Only
 Click the Flight Plan button.
 Type EHAM into the Departure ID box.
 Type LOWI into the Destination ID box.
 Type EDDM into the Alternate ID box.
 Type FL390 into the Cruise Altitude box.
 Type 460 into the Cruise Speed box.
 Type 2500 into the Climb Rate box.
 Type 2000 into the Descent Rate box.
 Verify that the Direct/GPS Routing Type is selected.
The window should look like this:
 Click the process button.
 Cancel out of the graphics install dialog (AS2012 only).
We now have a direct flight plan between EHAM and LOWI loaded into
AS. We can now make it a bit better by adding waypoints to it. AS only