Pneumercator ETD1000 - Page 23

ETD1000 Instruction Manual - 2017-07-01.docx Page 23 of 28 July 1, 2017
Table 3.2.1-1 Front Panel Programming
Display Function Mode
Tank # Enable *YES/NO
Gross Volume Enable *YES/NO
Net Volume Enable *YES/NO
Percent Volume Enable *YES/NO
Ulla
g
e Enable *YES/NO
Product Level Enable *YES/NO
Water Level Enable *YES/NO
Product Temperature Enable *YES/NO
In-Tank Leak Alarm Enable *YES/NO
SP1 Alarm Enable *YES/NO
SP2 Alarm Enable *YES/NO
SP3 Alarm Enable *YES/NO
Water Alarm Enable *YES/NO
Normall
y
*OFF/ON
Rela
y
Time
r
*NONE/1-9 MINUTES
Rela
y
# Alarm LEAK/SP1/*SP2/SP3/WATER
Rela
y
# Tank *NO/1-12
*Factor
y
Default