Getting Started 13
• When the battery is fully charged, you can discon-
nect the cable from the Device which is ready for usage.
If the Device is on when you connect the cable to PC, a
dialog window asking to select action – PC link or Charge–
will appear. Charging starts only if the appropriate mode
was selected.
DEVICE MANAGEMENT
Turn
on
Press On/Off button. When the Device is ready
to operate, Main menu or last opened book
will appear, depending on settings.
Turn
off
Press and hold On/Off button for about two
seconds until the Device goes off.
Lock
You can lock your Device in three ways:
1. Press On/Off button.
2. You can set automatic key lock or
power off: go to Settings > Saving Power >
Power off after or Auto screen lock, and set the
idle time before power off or locking Device.
Unlock Press On/Off button.
To Next Page
Loading...
