Settings 63
NOTE: You can also set your own picture as a logo from the Gallery
application. Read about it in the Gallery section.
LED indication — you can turn on or off an LED indicator.
The LED indicator is on if the device processor is active and
off if the device processor switches to the sleep mode to
save power.
When connecting to a charger or a PC via a USB port, the
LED indicator of the device is on when the battery is charg-
ing and turns off when charging completes.
Key Mapping. In this section you can remap hardware
keys. To change key action, select it from the list and select
action from the list.
Complete Page Refresh. Select the amount of page
turned before the screen will be updated completely. Al-
ways item provides the best quality, but consumes the
most power. Less frequency may cause some artifacts from
previous pages on a screen.
To Next Page
Loading...
