Settings 93
To enable the DARKmode, go to Settings > Personalize >
SMARTlight & DARKmode or open the notification panel
and select the icon .
In the settings, you may also enable the inversion of
illustrations in the Reading App in the DARKmode. This
can be helpful when reading technical literature that
contains drawings, diagrams etc., which mostly have a
light background.
Logos — the image will be displayed when the Device is
off. You can set a cover of the last opened book by setting
book cover.
NOTE: You can also set your own picture as a logo from the Gallery
application. Read about it in the Gallery section.
LED indication — you can turn on or off an LED indicator.
The LED indicator is on if the device processor is active and
off if the device processor switches to the sleep mode to
save power.
To Next Page