PM84 Android 13 User Manual
Accessories
75
© 2023 Point Mobile Co., Ltd. All rights reserved
Gun Handle
Attach & Use gun handle
With gun handle, you can use additional programmable button. The button is used for triggering scanner
usually.
If you want to change the function mapped to the trigger button, access Program Buttons and set
SCANNER_B
to the desired function.
RF88 (RFID Sled)
PM84 can get RFID tag data through RF88 (sold separately). PM84 and RF88 can be connected using Bluetooth
or wired connection.
To connect the devices, RFID Control application is required. You can download the app from Service Portal.
If you want to install the PM84 onto the RFID reader, a PM84-dedicated sled bracket must be assembled on the
RF88 referring to the RF88 User Manual Sled Bracket Replacement.
For more detail, see RF88 User Manual.
Charging cradle
Single Slot (Ethernet) Cradle (SSC / SEC)
SSC/SEC can charge the followings.
PM84 only
PM84 + Sled type accessory (gun handle or RF88) mounted
SSC/SEC is compatible with PM84 and PM95 both.
4SBC (4 Slot Battery Cradle)
4SBC has 4 battery slots so it can charge up to four pieces of battery simultaneously.
4SBC is compatible with PM84 and PM95 both.