point Vitap - Positioning Shoulder Operation

Rel. 03
22
Please follow the table here-below:
To create or change a tool
use the buttons shown in
the picture
6.2 MOBILE POSITIONING SHOULDER
1) Place the panel as in the picture
Parameter Insert (drilling) Insert (router) Insert ( groove)
Tool name Es “tool1” Es “ TOOL12” Es “ SAW120”
Tool category
1 3 4
Tool Type
1 1 1
Tool diameter
Maximum diameter
Es “10” Es “13” Es “120”
Tool lenght
Maximum lenght
Quote A Quote A 0,00
Bit thickness Quote B Quote B Quote C
Minimum speed of rotation Es1000 Es1000 3000
Maximum speed of rotation Es 3000 Es 18000 3000
Rotational Speed Es 3000 Es 18000 3000
Minimum speed of processing Es 0.7 Es 0.7 2
Maximum speed machining Es 8 Es 6 5
Processing speed Es 0.7 Es 0.7 2