Rel. 03
54
Spindles are not running - Check motor fuses
Broken points - Replace points
The running button does not start the machine
and light up
- Point programme is closed
- Check that no emergency device is on
(emergency button, lateral door limit switch
open, right or left extra-stroke)
- Check that enough pressure is delivered to
the air system
The PC is not working - Check that the UPS is ON
Pressers do not stop the part - Check that enough pressure is delivered to
the air system
In joblist, the program is not optimized - Make sure the design is in the directory
CAD4
- Ensure that design errors are not present
- Check what messages are presented on
errors
- Check that the directory "D: \ iLENIA \ Cn \
Prog" is not saturated
La password di Windows XP - XPESERVICE
To Next Page
Loading...