GENERAL INFORMATION
9.9
MASTER CYLINDER
DISASSEMBL
Y
1. Clean master cylinder and reservoir assembly.
Make sure you have a clean work area to
disassemble brake components.
2. Place a shop towel under brake line connection at
master cylinder. Loosen banjo bolt; remove bolt
and sealing washers.
CAUTION:
Brake fluid will damage finished surfaces. Do not
allow brake fluid to come in contact with finished
surfaces.
3. Remove master cylinder from handlebars.
Banjo Bolt
Master Cylinder
Piston Assy
Cover
Diaphragm
Sight Glass
Brake Lines
Master Cylinder Assembly
MASTER CYLINDER
INSTALLA
TION
Notice: When replacing the brake master cylinder
assembly or master cylinder parts, use the correct
parts. There are differnt brake master cylinders for
the different Polaris ATV models. Refer to your parts
manual or guide for the correct parts.
To Next Page
Loading...
