GENERAL INFORMATION
1.2
MODEL IDENTIFICATION
The machine model number must be used with any correspondence regarding warranty or service.
Machine Model Number Identification
Year Designation
Basic Chassis
Designation Engine Designation
A05CL50AA
Emissions &
Model Option
ENGINE DESIGNATION NUMBERS
EH500PLE104 Single, L/C. SOHC 4 Stroke, Electric Start..............
VIN IDENTIFICATION
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
4XA CL
50A*YP000000
Vehicle Descriptor
Vehicle Identifier
Powertrain
Engine
Emissions
Model
Year
Plant No.
Individual Serial No.
Body Style
Check Digit
World Mfg. ID
* This could be either
a number or a letter
ENGINE SERIAL NUMBER LOCATION
Whenever corresponding about an engine, be sure to refer to the engine model number and serial number. This
information can be found on the sticker applied to the recoil housing on the right side of engine.(A) An additional
number is stamped on the center top of crankcase beneath the cylinder coolant elbow.
MACHINE MODEL NUMBER AND SERIAL NUMBER LOCATION
The machine model number and serial number are
important for vehicle identification. The machine
serial number is stamped on the lower left side of
the frame tube.(B)
TRANSMISSION I.D. NUMBER
LOCA
TION
The transmission I.D. number is located
on top of the transmission, right side of
machine.
A
B
Front
To Next Page
Loading...
Need help?
General
