MAINTENANCE
2.10
LUBRICATION, CONT.
8. Demand 4 Hubs
4 or 8 O’clock position-
(end view)
7. Propshaft Yoke
(3 pumps max.)
6. Front Gear Case Fill Plug
Fill Plug
9. Strut Assembly
(Bottom Side)
DHF
ADF
Ill.
#
Item Lube Required Method Frequency*
6
Front Gearcase ATV Angle Drive Fluid
(PN 2871653)
Add to bottom of fill plug threads. See Page 2.11. Annually©
7
Propshaft Yoke Premium U-Joint
Grease (PN 2871551)
Locate fittings and grease - 3 pumps maximum Annually©
8
Demand 4 Hubs Polaris Demand Drive
Hub Fluid
(PN 2871654)
Remove filler hole screw in hubs. Rotate wheels to
4 or 8 O’clock position. If lubricant is not visible add
until it flows from filler hole. Reinstall screw.
Semi-annually
¡
9
Strut Assembly Polaris All Season
Grease¢
(PN 2871423)
Locate grease fitting and grease with grease gun. Semi-annually
¡
* More often under severe use, such as operated in water or under severe loads.
¡ Semi-annually or 50 hours of operation (refer to Maintenance Schedule for additional information)
More often under severe conditions (operating in water or hauling heavy loads)
© Annually or 100 hours of operation (refer to Maintenance Schedule for additional information)
More often under severe conditions (operating in water or hauling heavy loads)
¢ Grease conforming to NLGI No. 2, such as Polaris Premium All Season Grease, Conoco Superlube M or
Mobilegrease Special
To Next Page
Loading...
