MAINTENANCE
2.23
to the cover and seal all the way around.
A
4. Loosen clamp and remove air filter
assembly.
Gasket
Cover
Pre-filter
Main Element
Ill.1
Cleaning:
5. Slip the pre-filter element off of main element.
Clean the pre filter with hot soapy water.
6. Rinse and dry thoroughly.
7. Inspect element for tears or damage.
8. Inspect main filter and replace if necessary. If the
filter has been soaked with fuel or oil it must be
replaced.
Installation:
NOTE: Apply a small amount of general purpose
grease to the sealing edges of the filter before
reinstalling.
9. Reinstall pre-filter element over main filter. Be
sure the element covers entire surface of main
filter without folds, creases, or gaps.
Main Filter
Filter Support
Front
Air Box
Proper Filter Placement
Ill.2
10. Reinstall filter on main filter mount. Place filter
clamp over the assembly and tighten.
Filter Clamp
Ill.3
NOTE: The air filter should rest on the filter support.
Proper placement of the air filter is important to
prevent rattles and air leaks. See Illustration 2.
11. Install air box cover and secure with clips.
To Next Page
Loading...
