114
Maintenance
Cylinder Head Torque
Have your dealer or other qualified person check the ATV cylinder head for proper torque at
the first service, or after 25 hours.
Vehicle Immersion
If the vehicle tips or overturns in water deeper than the footrest level, or if the engine stops
during or after operating in water, restarting WILL result in serious engine damage. Take the
vehicle in for service before starting the engine. Your POLARIS dealer can provide this
service. If this is not possible, follow the vehicle immersion inspection and drying
procedures outlined below. This procedure will allow short-term operation only to drive the
ATV to a trailer or towing vehicle.
1. Move the ATV to dry land or at the very least, to water below the footrests.
2. Check the air box for any water and dry it if water is present.
3. Remove the spark plug.
To Next Page
Loading...
Need help?
General
