157
Maintenance
Transporting the ATV
1. Stop the engine. Place the transmission in gear. Lock the parking brake.
2. Secure the fuel cap, oil cap and seat.
NOTICE: Always tie the frame of the ATV to the transporting unit securely with suitable straps or rope.
The rack, bumper or handlebars do not offer enough support for tie-down while transporting.
3. Wrap the front tie strap through the frame tubes (not through the bumper tubes), or attach
a tie-down hook around each of the tubes.
4. Wrap the rear tie strap around the grab bar.
Step 3
Tubes
Step 3 Step 4
To Next Page
Loading...
Need help?
General
