Polaris OUTLAW 110 2017 User Manual

108
Maintenance
Engine Oil Change
1. Position the vehicle on a level surface.
2. Clean the area around the pre-filter plug.
3. Start the engine. Allow it to idle for two to three minutes.
4. Stop the engine.
CAUTION! Hot oil can cause burns to skin. Do not allow hot oil to contact skin.
5. Place a drain pan under the engine crankcase.
6. Remove the pre-filter plug. Allow the oil to
drain completely.
7. Wash the oil pre-filter screen with solvent to
remove debris. Allow the screen to air dry.

Polaris OUTLAW 110 2017 Specifications

General

Brand	Polaris
Model	OUTLAW 110 2017
Category	Offroad Vehicle
Language	English