136
Maintenance
Handlebar Adjustment
Improper adjustment of the handlebars or incorrect torquing of the adjuster block tightening bolts can
cause limited steering or loosening of the handlebars, resulting in loss of control and possible serious
personal injury or death. Follow the adjustment procedures exactly, or see your POLARIS dealer or
other qualified service person for service.
The handlebars can be adjusted for rider preference.
1. Remove the pod to access the handlebar bolts. Loosen
the four bolts.
2. Adjust the handlebar to the desired height. Be sure the
handlebars do not hit the gas tank or any other part of
the vehicle when turned fully to the left or right.
3. Lightly tighten each bolt equally to prevent uneven gaps
in the block. Torque the bolts to 7.3 ft. lbs. (10 Nm).
To Next Page
Loading...
Need help?
General
