Polaris p825 Owner's Manual

Page 16
English
Section 7. Troubleshooting
7.1 Using the Cleaner Error Indicator
The Cleaner Error Indicator on the control unit ashes in a specic sequence to indicate one of three possible
cleaner malfunctions.
Information LED Flashing Solution
LED ashes once with one second
interval.
Unplug the oating cable from the control unit and reconnect.
If the problem is not resolved through troubleshooting, contact
Polaris Technical Support at (USA) 1-800-822-7933; 1-888-647-4004
(Canada).
LED ashes twice with one second
interval.
Turn cleaner wheels to ensure they are not jammed.
Check brushes for debris.
Start a new cleaning cycle.
If the problem persists, contact Polaris Technical Support at (USA)
1-800-822-7933; 1-888-647-4004 (Canada).
LED ashes three times with one
second interval.
Check the pump axis for debris.
Check propellor for debris.
Clean the lter.
Start a new cleaning cycle.
If the problem persists, contact Polaris Technical Support at (USA)
1-800-822-7933; 1-888-647-4004 (Canada).

Polaris p825 Specifications

General

Pool Type	In-ground
Drive	4-wheel drive
Scrubbing	Yes
Type	Robotic Pool Cleaner
Cable Length	60 feet
Debris Type	Large
Power Source	Electric
Cleaning Coverage	Floor, Walls, Waterline
Warranty	2 years