Polaris p825 User Manual

Page 14
ENG
P825
3.3 Perform Test for Defective
Motor Block
1. Unplug the cleaner.
2. Remove the lter canister. Unscrew the
impeller housing and remove impeller.
3. Remove four (4) screws inside the canister at
the handle brackets.
4. Remove four (4) screws from the bottom of
the canister bowl.
5. Pry wheel keys from each side of the brush
and remove the brush.
6. Remove two (2) screws on each side of the
cleaner body and remove body housings.

Polaris p825 Specifications

General

Pool Type	In-ground
Drive	4-wheel drive
Scrubbing	Yes
Type	Robotic Pool Cleaner
Cable Length	60 feet
Debris Type	Large
Power Source	Electric
Cleaning Coverage	Floor, Walls, Waterline
Warranty	2 years