49
FEATURES AND CONTROLS
Instrument Cluster
Rider Information Center
Standard Modes
Use the yellow mode switch located near the instrument gauge to toggle
through the mode options. See page 42.
Odometer Mode
The odometer records the miles traveled by the vehicle.
Trip Meter Mode
The trip meter records the miles traveled by the vehicle on each trip if
it's reset before each trip. To reset the trip meter, select the trip meter
mode. Press and hold the mode switch until the total changes to 0.
NOTE: In the Rider Information Center, the trip meter display contains a deci-
mal point, but the odometer displays without a decimal point.
Hour Meter Mode
This mode logs the total hours the engine has been in operation.
Tachometer Mode
The engine RPM is displayed digitally.
NOTE: Small fluctuations in the RPM from day to day may be normal because
of changes in humidity, temperature and elevation.
Clock Mode
The clock displays time in a 12-hour format. To reset the clock, see page
50.
To Next Page
Loading...
Need help?
General
