87
MAINTENANCE AND LUBRICATION
Tires
WARNING
Improperly installed wheels can adversely affect tire wear and
vehicle handling, which can result in serious injury or death.
Always ensure that all nuts are torqued to specification. Do not
service axle nuts that have a cotter pin installed. See your
Polaris dealer .
Wheel Removal
1. Stop the engine. Place the transmission in gear. Engage the park
brake.
2. Loosen the wheel nuts slightly.
3. Elevate the side of the vehicle by placing a suitable stand under the
frame.
4. Remove the wheel nuts and washers. Remove the wheel.
Wheel Installation
1. Place the
transmission in gear.
2. Engage the park
brake.
3. Place the wheel in
the correct position
on the wheel hub. Be
sure the valve stem is
toward the outside and rotation
arrows on the tire point toward
forward rotation.
4. Attach the wheel nuts and washers
and finger tighten.
5. Carefully lower the vehicle to the ground.
6. Torque the wheel nuts t o specification. See page 86.
To Next Page
Loading...
Need help?
General
