36
THE PERFECT FIT
Rear Suspension Adjustments
Rear Torsion Sprin g Tension
To adjust rear torsion spring tension, rotate the three-position cam
using the engine spark plug tool.
Different rat e torsion springs are available if a firmer ride is desired.
Contact your dealer for more information.
The following information is provided only as a guideline t o be used
for initial suspension set-up. Your set-up may vary based on your
desired riding style.
1 - Turn screw clockwise to stiffen compression
2a - Limiter strap in high position increases ski pressure
2b - Limiter strap in low position decreases ski pressure
3a - Turn the knob to the left for a softer ride
3b - Turn t he knob to the right for a stiffer ride
4 - Turn the knob to a lower number for less rebound control (softer
ride) or to a higher number for more rebound control (stiffer ride)
5a - Soft Tension - long end of cam to front
5b - Medium tension - short end of cam up
5c - Firm tension - long end of cam up
5b
5a
5c
1
3a
3b
2a
2b
4
To Next Page
Loading...
