Polaris RZR 900 2016

7.8
9926814 R08 - 2015-2016 RZR 900 2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.
REAR BEARING CARRIER INSTALLATION
1. Install drive shaft through the back side of the bearing
carrier.
2. Install the fasteners
q
that attach the upper and
lower control arms to the bearing carrier. Torque bolts
to specification.
TORQUE
Rear Bearing Carrier Mounting Fasteners:
42 ft-lb (57 Nm)
3. Apply a small amount of anti-seize to the drive shaft
splines.
4. Install rear wheel hub assembly
w
, cone washers
e
and hand tighten the castle nut. Install washers
domed side out.
5. Install the rear brake caliper assembly and new bolts
r
. Torque bolts to specification.
TORQUE
Brake Caliper Mounting Bolts:
46 ft-lb (62 Nm)
FINAL DRIVE