Polaris RZR 900 2017 Service Manual

9
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.
9.45
53.Apply a thin layer of shock oil to the bearing
assembly’s external O-ring.
54.Push bearing assembly in with your finger tips.
55.Install retaining ring.
56.Use IFP tool to push down on IFP and fully extend the
shock shaft assembly.
57.Remove bleed screw and set IFP to the appropriate
height.
58.While holding the IFP, install bleed screw with O-ring
using a 9/16″ open end wrench.
59.Install reservoir cap O-ring on cap and apply a thin
layer of shock oil to side and O-ring.
60.Install reservoir cap and retaining ring.
STEERING / SUSPENSION

Polaris RZR 900 2017 Specifications

General

Brand	Polaris
Model	RZR 900 2017
Category	Offroad Vehicle
Language	English