40
FEATURES AND CO NTRO LS
Brake Lever
The front and rear brakes are
applied by squeezing the brake
lever (1) toward the handlebar.
The front and rear brakes are
hydraulically activated disc type
brakes that are activated by only
one lever.
Always test brake lever travel and
master cylinder fluid level before
riding. When squeezed, the lever
should feel firm. Any sponginess would i ndicate a possible fluid leak
or low master cylinder fluid level, which must be corrected before
riding. C ontact your dealer for proper diagnosis and repairs.
Operating the ATV with a spongy brake lever can result in loss
of braking, which could cause an accident.
Never operate the ATV with a spongy-feeling brake lever.
WARNING
1
To Next Page
Loading...
Need help?
General
