52
OPERATION
Starting the Engine
Starting a Cold Engine
3. Move the engine stop switch to RUN. NOTE: Do not press the
throttle while starting the engine.
4. Turn the i gnition key past the ON position to engage the starter.
Activat e the starter for a m aximum of five s econds, releasing the
key when the engine starts. If the engine does not start, release the
key and wait five seconds. Then activate the starter for another
five seconds. Repeat this procedure until the engine starts.
5. If the engine slows or stops, position the choke knob half way in to
allow proper engine warm up.
6. Vary the engine RPM slightly with the throttle to aid in warm-up.
When the engine idles smoothly, push the choke all the way in.
To Next Page
Loading...
Need help?
General
