1. Bumper
2. Display
3. Control panel
4. Dust bag retention button
5. Charging leads
6. Battery compartment lid
7. Left/right wheel
8. Central brush assembly
9. Fall-arrest sensors
10. Frontal wheel
11. Lateral brushes: R - right, L - left
12. Dust bag
13. Charging adapter connection socket
14. Power switch (ON/OFF)
CONTROL PANEL (Fig. 2)
1 - Cleanup schedule adjustment
2 - AUTO/NAVIGATE mode button
3 - Return-to-Base / Time increase button
4 - SPIRAL mode / Time decrease button
5 - Main cleanup mode activation button
DUST BAG AND WET CLEANUP CONTAINER
Dust bag (Fig. 3)
1. The lid
2. Dust vessel
3. Retention button
4. Primary filter
5. Foam filter
6. HEPA filter
Wet cleanup container (Fig. 4)
1. Retention button
2. Water tank
3. Rubber lid
4. Microfiber for wet cleanup
CHARGER (Fig. 5)
1. Activation indicator
2. Charging adapter
3. The contact unit
4. Adapter connection socket
REMOTE CONTROL UNIT (Fig. 6)
1. Return-to-Base button
2. Motion control button
3. Main mode Start/Stop button
4. Suction power increase mode "Maximum"
5. Navigation mode
6. Spiral mode
7. Wall-along cleanup mode
DELIVERY SET
1. Robotic vacuum cleaner assembly - 1 pc.
2. Dust bag (installed) - 1pc.
3. Water tank (wet cleanup container) with microfiber for wet cleaning - 1 pc.
4. Accumulator (electric battery - installed) - 1 pc.
5. Charging base - 1pc.
6. Charger (adapter) -1 pc.
7. Spare lateral brushes: L - 1 pc; R - 1pc.
8. Spare HEPA filter - 1 pc.
9. Baby battery of AA type for the remote control unit - 2 pc.
10. Spare microfiber for wet cleaning - 1 pc.
11. Cleaning brush - 1 pc.
12. Remote control unit - 1 pc.
13. Operation manual - 1 pc.
14. Warranty sheet - 1 pc.
To Next Page
Loading...
