English - 13 -
E-Manual
You can nd instructions for your TV’s features in the
E-Manual.
To access the E-Manual, enter Settings menu, select
Manuals and press OK. For quick access press Home
button and then Info button.
By using the directional buttons select a desired
category. Every category includes dierent topics.
Select a topic and press OK to read instructions.
To close the E-Manual screen press the Exit or Home
button.
Note: Depending on model, your TV may not support this
function. The contents of the E-Manual may vary according
to the model.
English - 14 -
Settings Menu Content
Picture Menu Content
Mode
You can change the picture mode to suit your preference or requirements. Picture mode
can be set to one of these options: Cinema,
Game (optional), Sports, Dynamic and
Natural.Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision
Bright picture mode options will be available instead of Cinema and Natural modes.
Contrast
Adjusts the light and dark values on the screen.
Brightness
Adjusts the brightness values on the screen.
Sharpness
Sets the sharpness value for the objects displayed on the screen.
Colour
Sets the colour value, adjusting the colours.
Energy Saving
For setting the Energy Saving to
Custom, O, Minimum, Medium, Maximum,
Auto, Screen o.
Note: $YDLODEOHRSWLRQVPD\GL௺HUGHSHQGLQJRQWKHVHOHFWHGMode.
Backlight
This setting controls the backlight level. This option will be ava
lable if the Energy Saving
is set to Custom. Highlight and use Left/Right directional buttons to set.
Picture Zoom
Sets the desired image size format.
Picture Shift
This option may be available depending on the Picture Zoom setting. Highlight and
press OK, then use directional buttons to shift the picture upwards or downwards.
Iris HDR
Virtual HDR function that manipulates colour, saturation and dynamic contrast, basically
converts Standard Dynamic Range picture to High Dynamic Range picture. Set as On
to enable.
Advanced Settings
Dynamic
Contrast
You can change the dynamic contrast ratio to desired value.
Colour Temp
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
are available.
White Point
If the Colour Temp option is set as Custom, this setting will be available
(located under
the Colour Temp setting)
. Increase the ‘warmth’ or ‘coolness’ of the picture by pressing
Left or Right buttons.
Tru Blue
White colour enhancement function that makes white colour more cooler in order to
make more bright picture. Set as On to enable.
Iris Dimming
Low, Medium, High and O options are available. While Iris Dimming is active, it will
enhance contrast locally for each dened zone.
Noise Reduction
If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
the amount of noise.
Iris Contour
Low, Medium, High and O options are available. While Iris Contour is active, it will
decrease the contour eects in low resolution contents and auto streaming services.
Film Mode
Films are recorded at a dierent number of frames per second to normal television
programmes. Turn this feature on
Auto when you are watching lms to see the fast
motion scenes clearly.
Skin Tone
Skin tone can be changed between -5 and 5.
Colour Shift
Adjust the desired colour tone.
Gamut Mapping
You can use this option to set the range of colours displayed on your TV screen. When
set as On, colours are set according to the source signal. When set as O, the TV’s
maximum colour capacity is used by default (recommended option).
Note: This option may not be available depending on the TV model and its features.
Dolby Vision
Notication
Sets the notication appearance preference for Dolby Vision contents. When set as On,
Dolby Vision logo will be displayed on the lower right side of the screen when Dolby
Vision content is detected.
To Next Page
Loading...
Need help?
General