Camera sound indicators You can disable the camera’s
audible error signals. (See Sound indicators on page 40 for a
description of these indicators.)
Expert preferences You can choose to transfer pictures from
the camera to an image processing application or directly to a
file on disk.
Changing the preferences To change any of the preference settings described above:
1 Connect the PDC-2000 camera to the computer as described
on page 23.
WARNING: DO NOT CONNECT OR DISCONNECT
THE PDC-2000 CAMERA OR ANY OTHER SCSI DEVICE
WHILE THE DEVICE OR YOUR COMPUTER IS TURNED
ON. DOING SO COULD DAMAGE THE DEVICE, YOUR
COMPUTER, OR BOTH.
2 Turn on the camera by pressing the Power button (a).
Using the PDC-2000 with your PC 99
To Next Page
Loading...
