Selecting Capture mode Before taking pictures, make sure the camera is in the Capture
mode. If the camera is in the Index mode instead, the word
“Index” (a) appears in the LCD panel. Set the mode to
Capture by pressing the Index button.
Setting the camera for
current lighting conditions
To achieve accurate colors, you must choose the white
balance setting that matches lighting conditions in the scene.
Using an incorrect setting can give your pictures an unnatural
yellow, blue or green tint.
Use the daylight setting for taking pictures outdoors, or when
taking pictures with the flash set to Automatic or On (see
Using flash on page 46).
When taking pictures indoors without flash under
incandescent or fluorescent lighting, change the camera to the
appropriate setting by pressing the White Balance button
(WB).
Using the PDC-2000 camera 43
To Next Page
Loading...
