• Set “Expert Preferences” for transferring pictures to an image
processing application or directly to a file on your computer’s
disk, for keeping the PDC-2000 plug-in active or closing it
after each transfer operation, and for enabling or disabling
the display of thumbnail images from the camera.
Working with pictures in the camera
Using either the PDC-2000 plug-in software with your
image-processing application or PDC-2000 Direct, you can
look at thumbnails (small representations) of pictures stored
in the camera without transferring them to the computer.
While viewing the thumbnails on your computer screen, you
can rotate pictures, transfer pictures to the computer, or
delete pictures from the camera.
Viewing pictures
in the camera
To display thumbnails of the pictures stored in the camera:
1 Connect the camera to your computer. If necessary, see
Connecting the camera to your Macintosh on page 17.
2 Turn on the camera by pressing the Power button (a).
3 Turn on your computer.
Using the PDC-2000 with your Macintosh 65
To Next Page
Loading...
