Quick startup
For more information, see the page indicated.
Setting up
Page
(Macintosh)
Page
(PC/Windows) Steps
7 7 1 Unpack the PDC-2000 camera.
11 11 2 Set the camera’s SCSI ID.
14 14 3 Install and charge the camera batteries.
17 23 4 Connect the camera to your computer.
21 27 5 Install the PDC-2000 plug-in, TWAIN
driver or PDC-2000 Direct on your
computer.
75 97 6 Set the camera internal settings (date,
time, user name, etc.).
Quick startup vii
To Next Page
Loading...
