2 Simultaneously press and hold the Erase button and the
Shutter button for 5 seconds to display “erase all?” (b) on the
LCD panel. (Be sure to press the Shutter button completely.)
Release the buttons when the message appears.
3 To erase all the pictures, press the Erase button a second time.
(If you decide not to erase the pictures, do not press the Erase
button. Instead, wait for the confirmation message to
disappear or press the Enter button.)
4 To change to Capture mode for taking more pictures, press
the Index button.
Unerasing pictures If you accidentally erase one or more pictures from the
camera, you may be able to recover (“unerase”) them with
the following procedure.
Note: These steps restore only the most recently taken
pictures. If you erase pictures and then take more before you
attempt recovery, the new pictures may overwrite the ones
you want to recover.
1 Turn the camera off by pressing the Power button.
58
To Next Page
Loading...
