Working with pictures in the camera
Using the PDC-2000 software (TWAIN driver, plug-in or
PDC-2000 Direct), you can look at thumbnails (small
representations) of pictures stored in the camera without
transferring them to the computer. While viewing the
thumbnails on your computer screen, you can rotate pictures,
transfer pictures to the computer, or delete pictures from the
camera.
Viewing pictures in
the camera
To display thumbnail images of the pictures stored in the
camera:
1 Connect the camera to your computer. If necessary, see
Connecting the camera to your PC on page 23.
2 Turn on the camera by pressing the Power button (a).
3 Turn on your computer.
4 Start your TWAIN compliant or plug-in compatible
application, or start PDC-2000 Direct.
Using the PDC-2000 with your PC 87
To Next Page
Loading...
