If you are not using PDC-2000 Direct, use one of the methods
below to display the Transfer Pictures window:
• If you are using Adobe Photoshop and the TWAIN driver,
pull down the File menu and choose Select TWAIN and
PDC-2000. Click on OK. Pull down the File menu again and
choose Acquire TWAIN.
• If you are using a TWAIN compliant application other than
Adobe Photoshop, refer to the application’s instructions for
acquiring images.
• If you are using a plug-in compatible application, pull down
the File menu, choose Acquire, and choose PDC-2000.
Note: If no pictures are stored in the camera, the Take
Pictures window appears instead of the Transfer Pictures
window.
3 Click the Take Pictures button to display the Take Pictures
window.
104
To Next Page
Loading...
