23
Polaroid PDC 4350 Digital Camera User Guide
www.polaroid-digital.com
• Setting Flash Mode
1. Turn on the camera and set the camera to
Capture mode.
2. Press the Flash button to cycle through
the ash modes and select the one you
need.
SE T
ME N U
DI S P
Flash button
NOTE:
When you rst press the Flash button, the LCD screen will turn black and the
Operation LED will blink in red which indicates the ash is charging. When
charging is complete, the icon (according to the ash setting you selected)
will appear on the LCD screen.
3. You can now take pictures using the Flash mode you selected. The
ash will recharge after each ash picture.
Flash Range:
• Wide: 3 ~ 9 feet (0.9 ~ 2.7 metres)
• Telephoto: 2.6 ~ 6.7 feet (0.8 ~ 2.0 metres)
To Next Page
Loading...
Need help?
General
