8 Transferring Pictures and Video Clips to a Computer
• Before you Transfer Pictures
IMPORTANT!
Before you transfer your pictures make sure you have installed the Polaroid
PDC 4350 Camera Driver from the CD. Please refer to “Installing the Software
Onto a Computer” on page 50.
• Connecting to Your Computer
Connecting with the USB Cable.
1. Turn the camera Off.
2. Plug the labelled end of the USB cable into the socket marked
on your computer.
3. Plug the other end of the USB cable into the port on your camera.
4. Turn on the camera and an interface “New Hardware Found” will
show on the computer desktop.
5. A removable disk drive will be installed onto your computer
automatically.
NOTE:
It is recommended to use AC adaptor when the camera is connected to a
computer.
To Next Page
Loading...
