41
At FM radio state, walkie-talkie function retains priority
always, which means FM radio function exits automatically
and turns to transceiver communication once there is same
frequency signal received at FM radio receiving mode.
At FM radio frequency mode: FM radio channel memorizing
mode can be entered by pressing [MR] key (there is 15 sto-
red channels)
FM Radio Scanner
Scanning frequency: at FM radio frequency mode, press [F]
key and then [MR] key is for whole frequency scanning:
start from the current frequency to scan the whole frequen-
cy range. Clockwise rotate the encoder to scan from low to
high and anti-clockwise rotate to scan in descending order.
It stays when there is signal scanned.
Rotate the encoder to continue to scan up or down, and
press any key to exit.
Channel scanning: at FM radio frequency mode, press [MR]
key once to enter channel state. And press [F] and [MR]
keys to enter channel scanning.
Clockwise rotate the encoder to scan channels from low to
high and anti-clockwise rotate to scan in descending order.
It stays when there is signal scanned. Rotate the encoder to
continue to scan up or down, and press any key to exit.
Radio-channel memorizing
(The same as transceiver channel memorization)
To Next Page
Loading...
