31
1.
2.
-
5.3.4 Risposta ad una chiamata di posizione (Position Reply)
1.
-
2.
5.3.5 Ricezione di una chiamata di area geograca
-
1.
-
ALL SHIPS
SAFETY FROM
987654321
987654321
987654321
00:01
AUTO SW OFF
CH REQUEST
10:12UTC
00:02
ENT$ACCEPT
KEY$SILENCE
ALL SHIPS
SAFETY FROM
987654321
00:01
AUTO SWITCH
CH16IN10S
10:12UTC
ENT$ACCEPT
KEY$SILENCE
CANCEL $EXIT
2) AUT O SW set to OFF (rotate the CH knob to view thewhole information of
received call
TEST
CALL FROM
AUTO ACK
IS OFF
11:1 0UTC
13:1 0UTC
ENT$ACK
KEY$SILENCE
CANCEL$EXIT
TEST
CALL FROM
AUTO ACK
IN 10S
ENT$ACK
KEY$SILENCE
2) T est reply set to AUT O rotate the CH knob to view the whole information of
received call)
1) LL reply set to MANUAL
2) LL reply set toAUT O
POSITION
REQUEST FROM
;:)
ENT$ACK
KEY$SILENCE
ENT$ACK
KEY$SILENCE
LL REPLY
SEND TO
CALLING
LL REPLY
SENT TO
KEY$SILENCE
ENT$RE ACK
CANCEL $EXIT
CANCEL $EXIT
CANCEL$EXIT
00:02 00:03
00:03
00:01 00:02 00:03
00:01 00:02 00:03
00:01 00:02 00:03
987654321
3) LL reply set toOFF
POSITION
REQUEST FROM
LL REPLY OFF
KEY$SILENCE
CANCEL$EXIT
5.3.4 Receiving a ಯPosition Reply ರcall
1. WhenಯPosition ReplyರreceivedtheAlerttonesoundandtheಯPOSITION ACKರ
messageonstlineanddisplaythesenderGPSdata
2. ThetimepositioncouldbestoredandabletooutputtotheNMEAportfor
externalChartplotter.
POSITION
REPLY FROM
5.3.5 Receiving a geographic area call
A GEOGRAPHIC AREA CALL are received by vessels by within a specific
geographical boundary area.
1. Whenyoureceivenotificationofageographicalcallpressanykeytocancel the
alert. The radio tunes to the disgnated channel by press ENT key or CANCEL key to
normal mode with original channel. The time and the user MMSI are displayed on
the screen and the call data is stored in the call log.
2. Monitortheworkingchannelforanannouncementfromthecalling vessel.
GEOGRAPHICAL
CALL FROM
5.3.6 Handling incoming calls while the equipment is engaged
When radio isengagedinhandlingannon-distress automated procedureanda
receiveddistresscallautomated procedurereceivedanotherDSCmessagesthat
arepertinenttothestation butnot the currently active automated procedure are
handled as described inasbelow
1) If the equipment is engaged on a call and a DSC call is received with a higher
priority than the current call theequipment will displayasbelow
NEW CALL
ACCEPT%
$YES
NO
LOW P CALL
IS RECEIVED
3) LL reply set toOFF
POSITION
REQUEST FROM
LL REPLY OFF
KEY$SILENCE
CANCEL$EXIT
5.3.4 Receiving a ಯPosition Reply ರcall
1. WhenಯPosition ReplyರreceivedtheAlerttonesoundandtheಯPOSITION ACKರ
messageonstlineanddisplaythesenderGPSdata
2. ThetimepositioncouldbestoredandabletooutputtotheNMEAportfor
externalChartplotter.
POSITION
REPLY FROM
5.3.5 Receiving a geographic area call
A GEOGRAPHIC AREA CALL are received by vessels by within a specific
geographical boundary area.
1. Whenyoureceivenotificationofageographicalcallpressanykeytocancel the
alert. The radio tunes to the disgnated channel by press ENT key or CANCEL key to
normal mode with original channel. The time and the user MMSI are displayed on
the screen and the call data is stored in the call log.
2. Monitortheworkingchannelforanannouncementfromthecalling vessel.
GEOGRAPHICAL
CALL FROM
5.3.6 Handling incoming calls while the equipment is engaged
When radio isengagedinhandlingannon-distress automated procedureanda
receiveddistresscallautomated procedurereceivedanotherDSCmessagesthat
arepertinenttothestation butnot the currently active automated procedure are
handled as described inasbelow
1) If the equipment is engaged on a call and a DSC call is received with a higher
priority than the current call theequipment will displayasbelow
NEW CALL
ACCEPT%
$YES
NO
LOW P CALL
IS RECEIVED
To Next Page
Loading...
