3) LL reply set to OFF
5.3.4 Receiving a “Position Reply” call
5.3.5 Receiving a geographic area call
-
-
5.3.6 Handling incoming calls while the equipment is engaged
-
3) LL reply set toOFF
POSITION
REQUEST FROM
LL REPLY OFF
KEY$SILENCE
CANCEL$EXIT
5.3.4 Receiving a ಯPosition Reply ರcall
1. WhenಯPosition ReplyರreceivedtheAlerttonesoundandtheಯPOSITION ACKರ
messageonstlineanddisplaythesenderGPSdata
2. ThetimepositioncouldbestoredandabletooutputtotheNMEAportfor
externalChartplotter.
POSITION
REPLY FROM
5.3.5 Receiving a geographic area call
A GEOGRAPHIC AREA CALL are received by vessels by within a specific
geographical boundary area.
1. Whenyoureceivenotificationofageographicalcallpressanykeytocancel the
alert. The radio tunes to the disgnated channel by press ENT key or CANCEL key to
normal mode with original channel. The time and the user MMSI are displayed on
the screen and the call data is stored in the call log.
2. Monitortheworkingchannelforanannouncementfromthecalling vessel.
GEOGRAPHICAL
CALL FROM
5.3.6 Handling incoming calls while the equipment is engaged
When radio isengagedinhandlingannon-distress automated procedureanda
receiveddistresscallautomated procedurereceivedanotherDSCmessagesthat
arepertinenttothestation butnot the currently active automated procedure are
handled as described inasbelow
1) If the equipment is engaged on a call and a DSC call is received with a higher
priority than the current call theequipment will displayasbelow
NEW CALL
ACCEPT%
$YES
NO
LOW P CALL
IS RECEIVED
3) LL reply set toOFF
POSITION
REQUEST FROM
LL REPLY OFF
KEY$SILENCE
CANCEL$EXIT
5.3.4 Receiving a ಯPosition Reply ರcall
1. WhenಯPosition ReplyರreceivedtheAlerttonesoundandtheಯPOSITION ACKರ
messageonstlineanddisplaythesenderGPSdata
2. ThetimepositioncouldbestoredandabletooutputtotheNMEAportfor
externalChartplotter.
POSITION
REPLY FROM
5.3.5 Receiving a geographic area call
A GEOGRAPHIC AREA CALL are received by vessels by within a specific
geographical boundary area.
1. Whenyoureceivenotificationofageographicalcallpressanykeytocancel the
alert. The radio tunes to the disgnated channel by press ENT key or CANCEL key to
normal mode with original channel. The time and the user MMSI are displayed on
the screen and the call data is stored in the call log.
2. Monitortheworkingchannelforanannouncementfromthecalling vessel.
GEOGRAPHICAL
CALL FROM
5.3.6 Handling incoming calls while the equipment is engaged
When radio isengagedinhandlingannon-distress automated procedureanda
receiveddistresscallautomated procedurereceivedanotherDSCmessagesthat
arepertinenttothestation butnot the currently active automated procedure are
handled as described inasbelow
1) If the equipment is engaged on a call and a DSC call is received with a higher
priority than the current call theequipment will displayasbelow
NEW CALL
ACCEPT%
$YES
NO
LOW P CALL
IS RECEIVED
3) LL reply set toOFF
POSITION
REQUEST FROM
LL REPLY OFF
KEY$SILENCE
CANCEL$EXIT
5.3.4 Receiving a ಯPosition Reply ರcall
1. WhenಯPosition ReplyರreceivedtheAlerttonesoundandtheಯPOSITION ACKರ
messageonstlineanddisplaythesenderGPSdata
2. ThetimepositioncouldbestoredandabletooutputtotheNMEAportfor
externalChartplotter.
POSITION
REPLY FROM
5.3.5 Receiving a geographic area call
A GEOGRAPHIC AREA CALL are received by vessels by within a specific
geographical boundary area.
1. Whenyoureceivenotificationofageographicalcallpressanykeytocancel the
alert. The radio tunes to the disgnated channel by press ENT key or CANCEL key to
normal mode with original channel. The time and the user MMSI are displayed on
the screen and the call data is stored in the call log.
2. Monitortheworkingchannelforanannouncementfromthecalling vessel.
GEOGRAPHICAL
CALL FROM
5.3.6 Handling incoming calls while the equipment is engaged
When radio isengagedinhandlingannon-distress automated procedureanda
receiveddistresscallautomated procedurereceivedanotherDSCmessagesthat
arepertinenttothestation butnot the currently active automated procedure are
handled as described inasbelow
1) If the equipment is engaged on a call and a DSC call is received with a higher
priority than the current call theequipment will displayasbelow
NEW CALL
ACCEPT%
$YES
NO
LOW P CALL
IS RECEIVED
To Next Page
Loading...
