Answering an Incoming Call
You have multiple options for answering an incoming call.
1. Lift up the handset.
2. Tap the Answer soft key
3. Press the Headset soft key
4. Press the Speakerphone button
You may also take the following actions:
• Ignore the call
• Forward the call
• Decline the call
Do Not Disturb (DND)
Do Not Disturb enables you to set your phone to automatically reject calls when you don’t want to be interrupted.
To enable Do Not Disturb, tap the DND icon on the home screen, select the line to enable DND and then tap Enable
at the bottom of your screen (if you have multiple lines, you can select Set All in the bottom left corner).
When you’re ready to begin receiving calls, disable Do Not Disturb by again tapping the DND icon on the home screen,
selecting the line to disable DND, and tap Disable at the bottom of the screen (if you’re disabling DND on multiple lines,
you can select Clear All at the bottom of your screen).
NOTE: When DND is enabled, callers will receive a recording “We’re sorry, the person you are calling is currently not
accepting calls” and the call will then be disconnected.
Adjusting the Volume
Adjust the ringer volume, speakerphone volume, and headset volume in the following ways:
• Ringer volume – adjust volume up or down when the phone is on hook
• Speaker volume - adjust the volume after speakerphone button has been activated
• Handset volume – adjust the volume with the handset off hook
To Next Page
Loading...
