Poly Savi 8200 Series User Manual

conference call mode. View conference call status by going to Plantronics Hub About >
Connections > Conferenced headsets.
Join Savi headsets manually
1 While on a call, press the base subscription button.
The base subscription LED flashes yellow and green.
2 For Savi 8200 headsets: Press the guest headset Call button for 4 seconds. Upon release, the
headset LED flashes green and red.
3 For Savi 700 headsets: Press the guest headset volume up button until the headset LED turns on.
4 The primary user will hear a request "Conference requested." To accept the request, press the
primary user's headset Call button. The base subscription LED turns solid yellow to indicate
conference call mode. View conference call status by going to Plantronics Hub About >
Connections > Conferenced headsets.
Exit a conference call
1 Guest headsets can remain as guests through multiple calls. To remove a guest headset, either
press the guest headset's Call button or dock the primary user's headset in the charge cradle.
1 To change the voice prompt language on your headset, directly connect your headset to your
computer via a USB/USB-C cable (do not dock it in the base cradle).
2 Open Plantronics Hub and go to Settings > Language
You can choose from: Cantonese, Danish, English (UK, US), French, German, Indonesian, Italian,
Japanese, Korean, Mandarin, Norwegian, Russian, Spanish, Swedish and Thai.
Change voice prompt
language
13

Poly Savi 8200 Series Specifications

General

Standby Time	Up to 50 hours
Charging Time	3 hours
Connectivity	DECT, Bluetooth
Wearing Style	Over-the-head
DECT Security Certification	Yes
Wireless Range	Up to 590 ft/180 m (line of sight)
Battery Talk Time	Up to 13 hours
Noise Cancelling	Active noise cancelling (ANC)
Microphone	Boom
Compatibility	PC, mobile phone
Microphone Frequency Response	100 Hz - 8 kHz
Speaker Frequency Response	20 Hz - 20 kHz
Hearing Protection	SoundGuard DIGITAL
Ear Cushions	Leatherette