Charge your headset
Place the headset in the charge cradle. The base charging LED flashes green when
charging the headset and turns solid green when the headset is fully charged. Charge for at
least 20 minutes prior to the first use. A full charge takes 3 hours.
Charge spare battery (Savi XX45 models only)
The spare battery ships in the compartment on the side of the charge cradle. When the
base is powered the battery charges. While charging the charge LED flashes green and
turns to solid green once charged.
NOTE You can replace the headset battery with the spare battery even during active calls.
With a full charge, the headset provides up to 4.5 hours of continual talk time in wideband
mode and up to 6.5 hours in narrowband mode.
Determine your headset battery status:
• Listen to the voice prompts after powering on the headset
• Press the base subscription button; the base Audio buttons light up (solid green is high
battery, ashing green is medium, ashing yellow is low, ashing red is critical).
• View in Poly Lens Desktop App
Replace your rechargeable battery after 3 years or 300 charge cycles, whichever occurs
rst.
To ensure replacement batteries meet high quality standards and for optimal
performance, use only Poly batteries.
Charge your headset
and spare battery
Talk time
Headset battery status
Replace rechargeable
battery
13
To Next Page
Loading...
Need help?
General