Poly Voyager 5200 Office - Fit and Charge; Fit; Charge

1 Slide headset over and behind your ear, then press gently toward your ear.
NOTE Remove your eyeglasses before donning the headset for best fit.
2 Rotate microphone boom until it is pointed toward your mouth.
3 Mic boom moves up and down for a better fit.
2 3
1
Change the eartip for a better fit.
1 Push in eartip and rotate to the left to unlock it.
1
2
2
2 Align new eartip into slot; push, rotate to the right and lock into place.
To wear the headset on your other ear, rotate the boom upwards then twist it around so
the eartip is on the other side before lowering the mic boom.
3
2
1
Before first use, charge your headset for a minimum of 20 minutes by placing it in the
cradle. The base display's battery icon turns solid blue when charging and turns off
when charge is complete. A full charge takes approximately 90 minutes.
NOTE You may also charge your headset using a micro-USB cable connected to a power source.
Fit and charge
Fit
Charge
9