EasyManua.ls Logo

Poly VVX 300

Poly VVX 300
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tel. 888.389.2899 | 7800 Woodley Ave., Van Nuys, CA 91406 USA
vvww.airespring.com
Poly IP Phones Quick Start Guide
|
2017
AireSpring
3
ABOUT CALLS
Only one call can be active at one time.
You can use the handset, speaker phone, or head set for
calls. During a call, you can change modes by picking up
the handset, or by pressing or
.
If you navigate away from your call(s), press to see
Active Call or Calls view again.
ENDING CALLS
To end an active call, replace the handset, press , or
press . Or, press End Call.
To end a held call, navigate to Calls view and highlight
the held call. Press Resume, and press End Call.
HOLDING CALLS
From Calls view, press Hold or
. Remember to
highlight the call rst.
To resume a held call, press Resume or
again.
TRANSFERRING CALLS
From Calls view, press Transfer or
, and call the
other party. When you hear the ringback tone, or after
you talk with the other party, press Transfer or
again. Press Blind to complete a transfer without
waiting for the ringback tone.
FORWARDING CALLS
To enable call forwarding, press Forward from Home or
Lines view. Select the forwarding type to enable, enter a
forwarding number, and press Enable.
To disable call forwarding, press Forward from Home or
Lines view, select the forwarding type to disable, and
press Disable.
To enable per-call forwarding: As your phone rings,
press Forward, enter the forwarding number, and
press Forward.
PLACING CALLS
Pick up the handset, or press or . Enter the phone
number, and press Send.
Or enter the phone number rst, then press Dial, pick
up the handset, or press
or .
From Lines view: Press the phone Line key, enter the
phone number, and press Send.
From Home view: Select New Call using the left and
right arrow keys. Enter the phone number, and
press Send.
Tip: Switching Between Lines and
Calls View
When in Calls view, switch to Lines view by
pressing More > Lines Switch back to Calls view
by pressing More > Calls
ANSWERING CALLS
To answer with the speakerphone, press or tap
Answer. To answer with the hand set, pick up the
handset. To answer with a headset, press
.
To answer a new call while on an active call,
press Answer. The current call will beheld.
Timesaver: Placing Calls Quickly
Select a recent call or Favorite, or se lect a contact’s
phone number in the Contact Directory .

Related product manuals