Polyaire ZoneMaser ZoneTouch V2 - Features

ZONEMASTER ZONETOUCH V2 ZONE CONTROL SYSTEM - User Manual
2
1) Features
 • Userfriendlylargetouchscreeninterface
 • Intuitiveuserinterface
 • Controlairowtoindividualzones
1
and groups
2
 • ColourLCDforclearerdisplay
 • Personalizedsystemsettingsandlabelling
 • Wallmountedwithuptotwotouchscreensavailableinasystem
 • 5-1-1ProgrammableOn/Otimeprograms
 • Oneselectableturbo
3
group to cool/heat a particular area quicker
 • Halfyear,OneyearandTwoyearservicereminderstocalltechnicianforcleaning
andservicingACsystem
4
.
 • Allzonesautomaticallyresumetheiroriginalon/ostateoncepowerisrestored
afterpoweroutage.
1. A zone is the area where air supply is controlled by one motorized damper
2. A group is a few zones grouped together which have the group name and are controlled (turning on and
o,oradjustingopeningpercentage)atthesametime.Agroupwillhaveatleastonezoneandnomore
than four zones.
3. Turbo function will give the selectedgroupafull-openingwhileallothergroups’(dampers)opening
positions are reduced by 50% of their open percentage value. This will bring a large volume of extra air
into the designated area and cool or heat the area quicker.
4. AC system is the ducted air conditioner which has ZoneTouch V2 as its zone control system.