Polyaire ZoneMaser ZoneTouch V2 - Manual Group Control; Group On;Off;Turbo

ZONEMASTER ZONETOUCH V2 ZONE CONTROL SYSTEM - User Manual
4
3) Manual Group control
3.1  GroupOn/O/Turbo
a) Onthehomescreen,touchagroupbutton(Figure2)tochangetheon/o
groupstatusandthedampersofthegroupwillopenorcloseaccordingly.
b) Thegroupstatuscanbesetto‘TURBO’activewhenthegroupisspecied
asaturbogroup(referto5.3)andthegreyturboindicatorwillturnblueto
    indicatetheTURBOfunctionisactive.Figure3showsthegroupstatus
sequence alternated by touching the group button.
c)Upto6groupbuttonsareshowninonescreenandtouch< or > to bring up
    previousornextpage.
Figure 2
Figure 3