3
Cisco™ Catalyst™
In-Line Power
Switch
IEEE 802.3af compliant
In-Line Power switch
(Optional)
Connecting Network and Power Source
AC Power Option
Connect the supplied Network cable
between the LAN jack on the phone
and the LAN port on the wall or hub/
switch device port. Connect the DC
plug on the AC wall adapter to the DC
jack marked on the phone.
In-Line Power Option
If the phone is connected to a compat-
ible Ethernet switch that can provide
in-line power, the phone will use that
power option. Simply plug the sup-
plied Network cable between the LAN
jack on the phone and an available
Power and Data port on the In-Line
Power switch.
(Optional)
To Next Page
Loading...
